BMW 188 Version Driveshaft Spacer Kit – Driveline Geometry Correction Upgrade for E30, E36, E46, E90, E91, E92 & E93 Non-M Models Including 323i, 325i, 328i, 330i & 335i

Upgrade the driveline geometry of your lowered BMW with the BEVINSEE 188 Version Driveshaft Spacer Kit, a highly recommended solution for correcting axle position on modified suspension setups. When E30, E36, E46, or E9X chassis are lowered, the change in suspension geometry can alter the driveshaft angle and create unwanted space between the driveshaft roller and spider inside the half shaft. Over time, that misalignment can cause uneven wear on the inboard joint and place extra stress on the axle assembly.

This spacer kit is designed to help restore a more correct axle position by reducing that unwanted gap and helping the half shaft stay closer to its intended operating range. For lowered street cars and performance builds, this makes it a smart preventative upgrade for improving driveline alignment and reducing unnecessary wear caused by suspension modifications.

Built from durable 6mm high-quality steel, these spacers are made to handle the demands of real-world driving while maintaining precise fitment. The laser-cut construction helps ensure accuracy, while the galvanized finish improves resistance to corrosion and abrasion over time. It is a simple but effective upgrade for BMW owners looking to better protect their axle setup after lowering the car.

This kit is specifically designed for BMW applications using the 188 version differential with an 86mm drive flange output. It is not compatible with 168 or 210 differential versions, so verifying your differential type before ordering is important. For vehicles with a larger gap between the half-shaft and flange, two spacers per side may be used if needed.

Key Features:

• Corrects Driveline Geometry on Lowered Cars: Helps restore proper half-shaft positioning after suspension modifications or lowering.
• Reduces Inboard Joint Wear: Helps prevent uneven wear caused by extra space between the driveshaft roller and spider.
• 6mm High-Strength Steel Construction: Built from durable steel for long-term strength and reliability.
• Laser-Cut Precision: Manufactured for accurate fitment and proper alignment.
• Galvanized Surface Finish: Helps resist corrosion and abrasion over time.
• Designed for Modified Suspension Setups: Ideal for lowered BMW applications where driveline angles need correction.
• Helps Reduce Stress on Ball Joints and Axles: Supports better axle-shaft angle and helps reduce unwanted strain on driveline components.

FITMENT:

• Compatible only with BMW applications using the 188 version differential with 86mm drive flange output.
• BMW 3 Series – E30 325i (1986–1992)
• BMW 3 Series – E36 323i, 325i, 328i (1992–1999)
  Will not fit M3 or 4-cylinder models.
• BMW 3 Series – E46 323i, 325i, 328i (1999–2005)
  Will not fit M3, 330i, or 4-cylinder models.
• BMW 3 Series – E90, E91, E92, E93 325i, 328i, 330i, 335i (2005–2012)
  Will not fit M3 or 4-cylinder models.
• BMW Z Series – E85 Z4 2.5i, 3.0i (2003–2008)

IMPORTANT NOTES:

Not suited for drifting purposes.

Will not fit 168 version small case differentials.

Will not fit 210 version differentials.

If the distance between the half-shaft and flange is too large, you can use 2 half-shaft spacers per side.

If your axle is already damaged or past its mechanical limits, noise, binding, or vibration may still remain. In that case, axle replacement is recommended.

ITEM SPECIFICATIONS:

Condition: Brand New

Type: Driveshaft Spacer Kit

Material: High-quality steel

Surface Finish: Galvanized

Thickness: 6mm

PACKAGE INCLUDES:

2PCS 6mm Driveshaft Spacers

1 Set of Extension Bolts

Please refer to the “Fitment” section in the product description for compatibility details.